I'm using a competitor's lubricant. Do you offer a similar product?

Nye will likely have a functional equivalent to the lubricant you are using. In many cases, a superior product may be available. When replacing lubricants that have been successful in your application, it is important to match the additives and type and viscosity of the base oil. When replacing grease, the grade and thickener should also be matched. Other lubricant properties may also be important for your application. Contact a Nye Technical support Engineer for specific recommendattions.

I've notice oil seperation in my grease? Is it still OK to use?

Some oil seperation or "pudding" which is sometimes seen on top of grease in pails or drums, should not be a problem. Oil separation is usually insignificant when compared with the mass of grease in the container. Normally, the separated oil can be safely stirred back into the bulk of the grease in the container. Experience has shown that much of this time-related oil separation can be reduced if the surface of the grease is kept smooth during storage, i.e., do not leave "craters" in the grease. The grade or consistancy of the grease is also related to oil separation. An NLGI Grade 000 grease, for example, can be expected to exhibit pronounced oil separation from the days its manufacture.

How much oil/grease should I apply on my component?

For most applications the lubricant should cover the entire surface with a thin layer. However, there are certain applications that require more or less lubricant. This generally determined by the OEM.